Do you have a question about the HIKVISION DS-7104HWI-SL and is the answer not in the manual?
Product color | White |
---|---|
Rack capacity | 1U |
Maximum frame rate | 30 fps |
Maximum video resolution | 1920 x 1080 pixels |
Video compression formats | H.264 |
Analog signal format system | NTSC, PAL |
Playback resolutions supported | 1920x1080, 1280x1024, 1280x720, 1024x768, 704x576, 704x480 |
BNC input ports | 8 |
Video input channels | 4 channels |
USB 2.0 ports quantity | 2 |
VGA (D-Sub) output ports | 1 |
Ethernet LAN | Yes |
Ethernet interface type | Gigabit Ethernet |
HDD interface | Serial ATA |
Maximum HDD capacity | 4000 GB |
DC voltage | 12 V |
Power consumption (typical) | 6 W |
Operating temperature (T-T) | -10 - 55 °C |
Operating relative humidity (H-H) | 10 - 90 % |
Width | 200 mm |
---|---|
Height | 45 mm |
Weight | 800 g |
Provides instructions for safely powering the DVR on and off.
Guides users on setting the initial administrator password for security.
Outlines the setup wizard for essential device configuration steps.
Explains the process of logging into and out of the device interface.
Details various functions and operations available in live view mode.
Covers configuring output interfaces, dwell times, and other live view parameters.
Details setting stream type, resolution, bitrate, and other encoding parameters.
Explains how to set up continuous, motion, or holiday recording schedules.
Guides on setting up motion detection areas, sensitivity, and response actions.
Details methods for playing back recorded video files by channel, time, or search.
Explains how to export and back up recorded files using USB devices.
Guides on configuring motion detection areas, sensitivity, and trigger channels.
Explains how to set up alarms for video loss events.
Covers configuring alarms for video tampering events.
Details how to configure responses to system exceptions like HDD errors.
Describes actions like full-screen monitoring, audible warnings, and email notifications for alarms.