Need help?Do you have a question about the HIKVISION DS-7108HQHI-F1/N and is the answer not in the manual?
General| BNC input ports | 1 |
|---|---|
| Video input channels | 8 channels |
| USB 2.0 ports quantity | 2 |
| Power consumption (typical) | 12 W |
| Voltage | 12 V |
| Product color | White |
| Rack capacity | 1U |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+ |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 800 g |
|---|---|
| Dimensions (WxDxH) | 200 x 200 x 45 mm |
Describes core features like camera connectivity, stream support, and resolution capabilities.
Details network interface configurations, supported protocols, and remote access.
Explains how to set PTZ parameters before controlling the camera.
Covers customizing and calling PTZ presets, patrols, and patterns for automated movements.
Explains how to access and use the PTZ control panel interface and its icons.
Details settings for main and sub-streams, resolution, frame rate, and bitrate.
Explains how to set up recording and capture schedules for different event types.
Details how to configure motion detection areas, sensitivity, and trigger actions.
Details how to play back recorded video and picture files.
Details the process of backing up video and picture files using USB or SATA devices.
Guides on setting motion detection areas, sensitivity, and trigger actions.
Details the actions to be taken when an alarm or exception occurs.
Details how to configure face detection rules, sensitivity, and linkage actions.
Explains vehicle detection for traffic monitoring, including license plate capture.
Covers configuring line crossing detection rules, direction, and sensitivity.
Details how to configure intrusion detection rules, including threshold and sensitivity.
Explains how to search for detected face pictures and play associated video files.
Details general network parameters like working mode, IP address, and DNS settings.
Covers advanced network configurations like PPPoE, Hik Cloud P2P, and DDNS.
Guides on enabling and configuring Hik Cloud P2P for remote DVR access.
Details how to create disk arrays using one-touch or manual configuration.
Covers enabling the RAID function during device startup or via HDD management.
Describes the quick process of creating a disk array, defaulting to RAID 5.
Details the process of initializing a new HDD before it can be used with the DVR.
Explains how to add and manage NAS or IP SAN disks as network HDDs.
Covers setting HDD storage mode to Group and configuring channels for groups.
Explains how to check the status of installed HDDs for maintenance.
To Next Page
