Need help?Do you have a question about the HIKVISION DS-7108HWI-SL and is the answer not in the manual?
General| Video Input | 8 channels |
|---|---|
| Compression | H.264 |
| Power Supply | 12V DC |
| Power Consumption | ≤ 10W |
| Operating Temperature | -10°C to +55°C |
| Video Output | 1 HDMI, 1 VGA |
| Recording Resolution | 4CIF/2CIF/CIF/QCIF |
| Network Interface | 1 RJ45 10M/100M Ethernet |
| Audio Compression | G.711 |
| Audio Input | 1 channel, RCA |
| Audio Output | 1 channel, RCA |
| Hard Drive | SATA interface |
| Playback Resolution | 4CIF/2CIF/CIF/QCIF |
| USB Interface | 2 x USB 2.0 |
| Operating Humidity | 10% to 90% (non-condensing) |
Provides step-by-step instructions for powering the device on, off, and rebooting.
Guides on setting the initial administrator password for device activation.
Explains how to use the setup wizard for initial device configuration.
Details how to configure PTZ parameters for compatible models.
Guides on setting camera positions, paths, and sequences for PTZ control.
Guides on setting stream type, resolution, bitrate, and recording parameters.
Details how to set up recording schedules for continuous or motion detection.
Introduces how to play back recorded video files using various search methods.
Guides on playing back recordings for a specific camera channel.
Guides on searching and playing back files based on recording type and time.
Guides on initializing a newly installed hard disk drive before use.
To Next Page