Need help?Do you have a question about the HIKVISION DS-7108HWI-SH and is the answer not in the manual?
General| Video Input | 8 channels |
|---|---|
| Video Compression | H.264 |
| Audio Output | 1 channel |
| Operating Temperature | -10°C to +55°C |
| Video Output | 1 HDMI, 1 VGA |
| Network Interface | 1 RJ45 10M/100M adaptive Ethernet interface |
| Power Supply | 12 VDC |
| Audio Compression | G.711 |
| Audio Input | 1 channel |
| Hard Drive | 1 SATA interface |
| USB Interface | 2 USB 2.0 interfaces |
| Operating Humidity | 10% to 90% (non-condensing) |
Critical safety warnings to prevent serious injury or death.
Precautionary measures to prevent potential injury or material damage.
Overview of general device capabilities including video inputs and encoding.
Steps to set the initial administrator password for device activation.
Guide to using the setup wizard for initial device configuration.
Key functions and mouse operations available in live view.
Steps to configure PTZ parameters for camera control.
How to set and manage PTZ presets, patrols, and patterns.
Setting stream types, resolution, bitrate, and other encoding parameters.
Setting up recording schedules for continuous or motion detection.
Setting motion detection parameters and response actions.
Methods for playing back recorded video files by channel or time.
Procedures for exporting and backing up recorded files.
Configuration of motion detection areas, sensitivity, and triggers.
Setting up basic network parameters like IP address and DNS.
Advanced network configurations including EZVIZ Cloud P2P and DDNS.
Procedure for initializing a newly installed hard disk drive.
Procedures for upgrading device firmware via local backup or FTP.
Creating, editing, and deleting user accounts and permissions.
To Next Page