HIKVISION DS-7108HI-S Series

DS-7108HI-S series Net DVR User Manual
1
DS-7108HI-S series Net DVR User Manual
V2.0
Thank you for purchasing our Net DVR. This manual is applicable to DS-7108HI-S Series
Net DVR. Please read this User Manual carefully to ensure that you can use the device correctly
and safely.
The contents of this Manual are subject to change without notice.

HIKVISION DS-7108HI-S Series Specifications

General

Video Input	8 channels
Compression	H.264
Power Supply	12V DC
USB Interface	2 USB 2.0 ports
Power Consumption	≤ 10W
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Video Output	VGA
Recording Resolution	CIF/QCIF
Storage	1 SATA interface
Network Interface	1 RJ45 10M/100M Ethernet interface
Audio Compression	G.711
Audio Input	1-ch
Audio Output	1 channel
Frame Rate	25 FPS (PAL), 30 FPS (NTSC)
Playback Resolution	CIF/QCIF

Summary

Chapter 1 Product Introduction

1.1 Overview

Provides a general overview of the DS-7108HI-S series network digital video recorder.

1.2 Model Description

Details the model name structure and its components for the DS-7108HI-S series.

1.3 Key Features

Lists the key features and capabilities of the DS-7108HI-S series DVR.

DVR Storage Capabilities

Outlines storage capabilities including SATA interfaces, HDD support, and backup options.

DVR Preview and Playback

Describes the preview and playback functionalities, including video outputs and layouts.

DVR Network Capabilities

Details network capabilities like TCP/IP, ADSL, remote access, and firmware updates.

Additional DVR Functions

Covers additional features like network voice talk, user management, and SDK support.

Chapter 2 Installation

2.1 Checking DVR and Accessories

Instructions to verify the DVR and its included accessories upon receipt.

2.2 HDD Installation

Provides guidance on the recommended HDD type and the step-by-step process for HDD installation.

2.3 Rear Panel Description

Identifies and describes all the ports and connectors located on the rear panel of the DVR.

Chapter 3 Operating Instructions

3.1 Front Panel Introduction

Details the components and functions of the DVR's front panel, including lamps and keys.

3.2 IR Remote Control

Explains the functions of the IR remote control and its buttons.

IR Control Battery Installation

Step-by-step guide for inserting batteries into the IR remote control.

Using IR Control

Instructions on how to begin using the IR remote control for DVR management.

Stopping IR Control

How to disable the IR remote control functionality.

Switching DVR Off via IR

Procedure for safely shutting down the DVR using the IR remote.

IR Control Troubleshooting

Troubleshooting tips for common issues with the IR remote control.

3.3 Menu Description

Introduction to the DVR's menu system.

3.3.1 Menu Items

Lists and categorizes the various menu items available on the DVR.

3.3.2 Menu Operation

Explains how to navigate and operate the DVR's menu system.

Main Menu Description

Illustrates and explains the main menu interface of the DVR.

Camera Input Adjustment

Details the interface for adjusting camera input settings like name, color, and OSD.

Exiting the Menu

Instructions on how to exit the DVR's menu system and return to preview mode.

3.4 Input Text

Guide on how to input text using the DVR's interface, including different input modes.

Chapter 4 Basic Operation Guide

4.1 Power On

Steps for powering on the DVR correctly and checking status indicators.

4.2 Preview

Explains how to enter and navigate the DVR's preview mode.

4.3 Video Spot Output

Instructions for setting up and using the video spot output feature.

4.4 User Name and Password

Details on the default administrator credentials and user login procedures.

Modifying Passwords

Steps for changing the user password via the main menu.

4.5 PTZ Control

PTZ Control Interface

Explains how to access and use the PTZ control interface.

Selecting a Channel for PTZ

Steps for selecting a specific camera channel for PTZ control.

PTZ Control Keys

Lists the IR remote control buttons used for PTZ operations.

Adjust Preset Description

How to set and manage PTZ presets for camera positions.

Manual Record

Manual Record Interface Description

Explains the components of the manual record interface.

4.7 Playback

Playback Interface

Details the interface for playback operations, including search and navigation.

Playback Description

Explains how to select channels, record types, and time sections for playback.

Playback Operation

Instructions on controlling playback, adjusting speed, and managing playback progress.

Exiting Playback

How to exit the playback interface and return to preview mode.

Playback with Mouse

Describes playback operations when a mouse is connected.

Playback Control Bar

Explains the functions of the playback control bar elements.

4.8 Backup Recorded Files

Backup Intraday Files

Steps to back up all recorded files from the current day.

Backup Matched Files

Process for searching and selecting specific files for backup.

Backup Video Segments

How to back up specific segments of recorded video.

Playback Video Segments

Information on playing back video segments on a PC.

Exiting Playback Interface

How to exit the playback interface.

4.9 Shut Down DVR

Instructions for properly shutting down the DVR.

Chapter 5 Parameters Setup Guide

5.1 Administrator and Password

Details on managing administrator and user accounts and passwords.

5.2 Add and Delete User

Procedures for adding new users and removing existing ones.

User Rights Description

Explains the different types of user operational rights (Local and Remote).

Deleting Users

Steps to delete a user account from the DVR.

5.3 Unit Name and Device ID

How to set the unit name and device ID for the DVR.

5.4 Video Output Standard and VGA Setup

Camera Name Position

How to adjust the position of the camera name on the screen.

OSD Settings Overview

Details OSD settings including time, format, and position.

System Time Setup

Instructions for setting the DVR's system date and time.

Date OSD Position

How to adjust the position of the Date OSD.

5.5 Camera Name and OSD Setup

5.6 Video Parameters Setup

5.7 Mask Area Setup

5.8 View Tampering Alarm

5.9 Video Loss Alarm

5.10 Motion Detection

5.11 Preview

5.12 Recording Setup

5.22 Recording Schedule Setup

Detailed steps for setting up daily and weekly recording schedules.

5.13 External Alarm Input and Relay Output

Alarm Relay Output Setup

Configuration for alarm relay output timing and scheduling.

5.14 Network Parameters

5.15 PTZ

PTZ Menu Description

Overview of the PTZ menu options and settings.

PTZ Camera Selection

How to select the camera for PTZ control.

RS-485 Parameters

Details on configuring RS-485 communication parameters.

PTZ Address Configuration

How to set the unique address for each PTZ device.

Supported PTZ Types

List of supported PTZ protocols.

PTZ Preset Setup

Guide on setting up and saving PTZ presets for camera positions.

Adding PTZ Presets

Steps to add and configure a new PTZ preset.

Deleting PTZ Presets

How to delete an existing PTZ preset.

PTZ Sequence Setup

How to set up PTZ sequences, combining multiple cruise points.

PTZ Cruise Setup

Guide on setting up PTZ cruise paths.

Chapter 6 Utilities

6.1 Restore Parameters

Restoring DVR to factory default settings, excluding network parameters.

6.2 Upgrade

Instructions for upgrading the DVR firmware using FTP or USB.

6.3 Hard Disk Management

Managing the DVR's hard disk, including status checks and formatting.

Formatting HDD

Steps and warnings related to formatting the hard disk drive.

6.4 Stop Alarm Out

Manually clearing the alarm output.

6.5 Reboot

Instructions for rebooting the DVR.

6.6 Power Off

Instructions for shutting down the DVR.

6.7 View Log

Accessing and viewing system logs recorded by the DVR.

View Log by Type

How to view logs filtered by major and minor types.

View Log by Time

How to view logs within a specified time period.

View Log by Type and Date

How to view logs filtered by type and date range.

6.8 System Information

Viewing detailed system information about the DVR.

Chapter 7 Firmware Upgrade

7.1 FTP Server Setup

Steps to set up an FTP server for firmware upgrades.

7.2 Upgrade Mode

Describes different modes for upgrading firmware (Client, FTP, USB, RS-232).

Appendix A Mouse Control Function

Preview Interface Mouse Controls

Mouse controls for the preview interface, including single and multi-picture views.

PTZ Interface Mouse Controls

Mouse controls for navigating and operating the PTZ interface.

CameraOSD Mouse Controls

Mouse controls for setting camera names and OSD positions.

Area Configuration Mouse Controls

Mouse controls for configuring motion detection or mask areas.

Text Input Mouse Controls

Mouse controls for text input and editing.

Playlist Mouse Controls

Mouse controls for playlist operations like copying and playing files.

User Interface Mouse Controls

Mouse controls for user management and privilege settings.

Appendix B HDD Capacity Calculation

Formula 1: Hourly Channel Capacity

Formula for calculating hourly channel capacity based on bit rate.

Formula 2: Channel Storage Capacity

Formula for calculating storage capacity per channel based on daily recording time and retention days.

Formula 3: Scheduled Recording Capacity

Formula for calculating total capacity for scheduled video recording across all channels.

Formula 4: Alarm Recording Capacity

Formula for calculating total capacity for alarm/motion detection recording.

Appendix C DVR Connect Cable Definition

UTP Network Cable Method

Material and tools for making UTP network cables and pin definitions.

RS-232 Connect Cable Method

Material, tools, and pin definitions for creating RS-232 cables.

Appendix D Specifications

Appendix E Troubleshooting

Appendix F Product Service

Appendix G Customer Information Card