DS-7108HI-S series Net DVR User Manual
31
Talk: Client talks with DVR;
Alarm: Remote control DVR alarm output;
Local Out: Remote control DVR video output;
Com Ctrl: DVR RS-232 parameters setup.
MAC address
This MAC address is not the address of DVR but the address of the PC which will access
DVR. If you setup this function, only the PC with this MAC address can access this DVR.
At PC terminal, in DOS prompt, you can use “ipconfig” command to get the PC MAC
address.
Delete user
In “User Management” interface, you can use [] [] keys to select one user, then use []
to move “Active Frame” to “Del” button, press [ENTER], in the pop-up confirmation dialog, press
“Confirm” button to delete the selected user and return. Press “Cancel” or [ESC] to abort deleting.
Shown as Fig.5.7 below
Fig. 5.7 Delete user
5.3 Unit Name and Device ID
Unit name
Enter “Utilities” “System Info” and “Unit Name” will be seen as Fig.5.8 below:
To Next Page
Loading...
Need help?
General