Need help?Do you have a question about the HIKVISION DS-7108HGHI-F1 and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Certification | CE |
| Product color | White |
| Channels quantity | 8 channels |
| Maximum frame rate | 30 fps |
| Audio output channels | 2.0 channels |
| Audio formats supported | G.711 |
| Multi-display supported | Yes |
| Network connection type | RJ-45 |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264 |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video in | BNC |
| Video out | HDMI, VGA |
| Audio input | 1x RCA |
| BNC input ports | 8 |
| USB 2.0 ports quantity | 2 |
| Number of users | 128 user(s) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power requirements | DC |
| Power consumption (typical) | 12 W |
Weight and Dimensions| Weight | 800 g |
|---|---|
| Dimensions (WxDxH) | 200 x 200 x 45 mm |
Offers advice for proper installation, environment, and usage to prevent damage.
Provides step-by-step instructions for powering the DVR on and off correctly.
Guides through the initial device activation and setting an admin password.
Details how to add detected network cameras to the device's connection list.
Details settings for video encoding, including resolution, frame rate, and bitrate.
Covers backing up recorded video and picture files to external storage devices.
Details configuring motion detection parameters, area, sensitivity, and response actions.
Guides on configuring face detection rules, sensitivity, and alarm actions.
Covers basic network parameters like IP address, gateway, and working modes.
Details creating disk arrays using RAID levels like RAID0, RAID1, RAID5, RAID6, RAID10.
Guides on initializing newly installed hard disk drives before use.
Details adjusting image parameters like brightness, contrast, and saturation for cameras.
Guides on adding new user accounts with specific permissions and security levels.
To Next Page
