Need help?Do you have a question about the HIKVISION DS-7108HQHI-K1 and is the answer not in the manual?
General| BNC input ports | 1 |
|---|---|
| Video input channels | 8 channels |
| USB 2.0 ports quantity | 2 |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Power consumption (typical) | 12 W |
| Voltage | 12 V |
| Product color | White |
| Rack capacity | 1U |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1000 g |
|---|---|
| Dimensions (WxDxH) | 200 x 200 x 45 mm |
Covers the initial activation process, including password setup.
Explains how to add and integrate IP cameras with the DVR.
Explains various functions available during live view.
Explains how to configure camera movement presets and patrol paths.
Sets video compression, bitrate, and quality for recording.
Allows setting specific times and days for recording.
Sets up recording triggered by motion detection events.
Configures recording and image capture based on alarm inputs.
Sets up recording for various VCA and alarm events.
Covers methods for accessing and viewing recorded video.
Search and play recordings based on date and time.
Search and play recordings triggered by specific events like motion or alarms.
Details methods for exporting recorded video and picture files.
Configures motion detection zones, sensitivity, and recording triggers.
Defines what actions the DVR takes when an alarm is triggered.
Detects and alerts on human faces in the video feed.
Triggers alarms when objects cross a defined virtual line.
Detects objects entering or loitering in a defined virtual region.
Searches for recorded footage containing detected faces.
Enables remote access via Hik-Connect mobile application and platform.
Prepares new HDDs for use by formatting and initializing them.
Adjusts image quality settings for cameras.
Updates the DVR firmware using backup devices or FTP.
To Next Page
