Need help?Do you have a question about the HIKVISION DS-7104HWI-SH and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Compression | H.264 |
| Power Supply | 12V DC |
| Audio Compression | G.711 |
| Operating Humidity | 10% to 90% |
| Recording Resolution | 1080p/720p |
| Network Interface | 1 RJ-45 10/100 Mbps |
| Audio Output | 1 channel |
| Hard Drive | 1 SATA interface |
| USB Interface | 2 × USB2.0 |
| Power Consumption | ≤ 10W |
| Operating Temperature | -10°C to +55°C |
| Weight | 1.5 kg |
| Audio Input | 1-ch |
Instructions for powering the device on, off, and rebooting.
Guides on setting the initial administrator password for device activation.
Covers setting up camera presets, patrols, and patterns for automated movement.
Details setting stream type, resolution, bitrate, and recording modes.
Guides on setting motion detection areas, sensitivity, and triggers.
Covers various methods for playing back recorded video files by channel, time, or search.
Explains exporting record files using Quick Export, Normal, and Event Search methods.
Guides on configuring motion detection areas, sensitivity, and triggers.
Configures responses to alarms like full-screen monitoring or email alerts.
Covers basic network settings like IP address, gateway, and DNS.
Details P2P, DDNS, PPPoE, NTP, UPnP, and email configurations.
Guides on initializing a newly installed hard disk drive.
Explains how to check the status of installed HDDs.
Covers detecting and repairing bad sectors on HDDs.
Sets up alarms for HDD errors or abnormal status.
Guides on upgrading firmware via local backup or FTP server.
To Next Page