Need help?Do you have a question about the HIKVISION DS-7104HGHI-E1 and is the answer not in the manual?
General| Compression | H.264 |
|---|---|
| Storage Interface | 1 SATA interface |
| Video Input | 4 channels |
| Video Output | 1 HDMI, 1 VGA |
| Recording Resolution | 720p |
| Network Interface | 1 RJ45 10/100 Mbps |
| Power Supply | 12 VDC |
| Audio Input | 1-ch |
| Audio Output | 1 channel |
| USB Interface | 2 USB 2.0 |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
Procedure for properly starting and shutting down the Digital Video Recorder.
Steps for initial device activation, including setting an admin password.
Steps for activating and adding IP cameras to the system.
Procedure for setting PTZ parameters before controlling the camera.
Steps to set and manage PTZ presets, patrols, and patterns for camera positioning.
Setting recording parameters like stream type, resolution, and bitrate.
Setting schedules for automatic recording and capture events.
Setting motion detection parameters and configuring response actions.
Configuring recording and capture triggered by external alarm inputs.
Configuring recording and capture for various VCA and alarm events.
Playing back recorded video files using various search methods.
Procedure for backing up record files to external devices via USB or SATA.
Configuring motion detection parameters, area, and sensitivity.
Setting handling methods for external sensor alarms.
Configuring detection and response actions for video loss on channels.
Configuring detection and response for video tampering events.
Configuring handling methods for various system exceptions like HDD errors.
Configuring actions like full screen monitoring and audible warnings for alarms.
Configuring face detection rules and sensitivity for surveillance scenes.
Configuring vehicle detection for traffic monitoring and license plate capture.
Setting rules for detecting objects crossing a virtual line with directionality.
Configuring rules for detecting objects entering or loitering in a predefined region.
Configuring basic network parameters like IP address and working mode.
Advanced network configurations including PPPoE, Cloud P2P, DDNS, NTP, NAT.
Setting up disk arrays using RAID levels like RAID0, RAID1, RAID5, RAID6, RAID10.
Initializing newly installed hard disk drives before use.
Upgrading the DVR firmware using a local backup device or FTP server.
Common issues and solutions for device startup, audio, and playback problems.
To Next Page
