Need help?Do you have a question about the HIKVISION DS-7104HGHI-SH and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Certification | CE |
| Product color | White |
| LED indicators | Yes |
| Channels quantity | 4 channels |
| Maximum frame rate | 30 fps |
| Audio output channels | 2.0 channels |
| Audio formats supported | G.711 |
| Network connection type | RJ-45 |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264 |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video in | BNC |
| Video out | HDMI, VGA |
| Audio input | 1x RCA |
| BNC input ports | 4 |
| USB 2.0 ports quantity | 2 |
| Number of users | 128 user(s) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 4000 GB |
| Power requirements | DC |
| Power consumption (typical) | 15 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 800 g |
|---|---|
| Dimensions (WxDxH) | 200 x 200 x 45 mm |
Describes the layout and indicators on the front panel of the DVR.
Explains how to use the infrared remote control to operate the DVR.
Details how to use a USB mouse for navigating and controlling the DVR.
Details the various ports and connections available on the rear panel of the DVR.
Provides instructions for properly powering on and off the DVR to ensure longevity.
Guides users through the initial setup process using the DVR's configuration wizard.
Explains how to add and connect IP cameras to the DVR for surveillance.
Introduces the live view function, displaying real-time video from cameras.
Explains various operations and functions available during live view mode.
Details how to customize live view settings like output interfaces and dwell times.
Describes how to manually diagnose video quality for analog channels.
Guides users on setting up parameters for Pan, Tilt, and Zoom (PTZ) cameras.
Details how to set up PTZ presets, patrol paths, and movement patterns.
Details the PTZ control interface and its various icons and functions.
Explains how to set video encoding parameters like resolution, frame rate, and bitrate.
Guides users on setting up schedules for automatic recording based on time and events.
Details how to set up motion detection parameters to trigger recording.
Explains how to set up redundant recording for enhanced data safety and reliability.
Explains methods to protect recorded files from being overwritten or lost.
Guides users on retrieving and viewing recorded video files.
Explains how to play back recordings based on a specific date and time.
Guides on searching and playing back recordings related to specific events.
Details how to perform smart searches within playback for specific events or areas.
Guides on backing up recorded video files to external storage devices.
Details backing up files using a standard video search method.
Covers managing connected backup devices like USB drives and HDDs.
Details how to configure motion detection parameters and response actions.
Guides on setting up detection and response for video loss events.
Details how to configure detection and response for video tampering events.
Details the actions to be taken when an alarm or exception occurs.
Covers basic network settings like IP address, subnet mask, and DNS.
Details advanced network configurations for enhanced connectivity.
Guides on configuring ezviz cloud for remote access and mobile app integration.
Guides on using network detection functions for diagnostics.
Guides on initializing newly installed Hard Disk Drives for DVR use.
Explains how to add and manage network attached storage (NAS) or IP SAN disks.
Covers organizing and managing multiple HDDs into groups for recording.
Guides on checking the status of installed HDDs for normal operation.
Guides on configuring On-Screen Display settings for cameras (date, name, etc.).
Explains how to set up privacy mask zones to block specific camera view areas.
Details how to adjust video parameters like brightness, contrast, and sharpness.
Guides on viewing system, camera, record, and alarm information.
Guides on searching, viewing, and exporting system log files.
Details how to upgrade the DVR's firmware using local devices or FTP.
Explains how to restore the DVR to its factory default settings.
Guides on configuring general system settings like language, resolution, and time.
Guides on managing user accounts, including adding, deleting, and editing permissions.
Explains how to log out, shut down, or reboot the DVR.
Offers solutions to common issues encountered with the DVR and its components.
Lists IP cameras that are compatible with the DVR for integration.
To Next Page