Digital Video Recorder User Manual
151
Chapter 8 Alarm Settings
8.1 Setting Motion Detection
Step 1 Enter Motion Detection interface of Camera Management and choose a camera you want
to set up motion detection.
Menu> Camera> Motion
Figure 8-1 Motion Detection Setup Interface
Step 2 Set detection area and sensitivity.
Check checkbox to enable motion detection. Use the mouse to draw detection area(s)
or click Full Screen to set the detection area to be the full screen and drag the sensitivity
bar to set sensitivity.
Click to set alarm response actions.
Figure 8-2 Set Detection Area and Sensitivity
To Next Page
Loading...
