Need help?Do you have a question about the HIKVISION DS-7104HGHI-F1 and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Video Input | 4 channels |
| Audio Input | 1 channel |
| Audio Output | 1 channel |
| HDD Interface | 1 SATA interface |
| HDD Capacity | Up to 6TB |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12 VDC |
| Operating Temperature | -10 °C to +55 °C |
| Operating Humidity | 10% to 90% |
| Video Output | 1 VGA, 1 HDMI |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
Details the components and indicators on the front panel of the DVR.
Describes the various input/output ports and connectors on the rear panel.
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
For the first-time access, you need to activate the device by setting an admin password.
The Setup Wizard starts once the device has loaded to complete basic configuration.
Before adding the camera, make sure the IP camera to be added is in active status.
In live view mode, functions like Single Screen and Multi-screen display are available.
Customize live view settings such as output interface, dwell time, and audio.
Configure recording parameters for main stream, sub-stream, and capture for each camera.
Set the recording schedule, allowing the camera to automatically start/stop recording.
Set motion detection parameters to trigger actions like recording or alarms.
Play back recorded video files via live view, normal search, or event search.
Play back video files by specifying time duration and selecting multiple channels.
Configure motion detection parameters, including area, sensitivity, and response actions.
Define actions like Full Screen Monitoring or Audible Warning when an alarm occurs.
Configure essential network parameters like IP address, gateway, and DNS server.
Enable Cloud P2P for mobile phone and web access to manage the DVR remotely.
A newly installed hard disk drive (HDD) must be initialized before it can be used with the DVR.
Organize multiple HDDs into groups for efficient video recording and storage management.
Update the DVR firmware using a local backup device or a remote FTP server.
Lists detailed technical specifications for various DVR models.
Provides solutions for common issues like no image displayed or no record file found.
To Next Page
