Name: HIKVISION DS-7104HGHI-F1
Brand: HIKVISION
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Digital Video Recorder User Manual

180

Figure 10-8 Draw Area for Intrusion Detection

Step 8 Click Apply to save the settings.

The sudden scene change detection and the intrusion detection cannot be enabled at the same

channel.

10.5 Region Entrance Detection

Purpose

Region entrance detection function detects people, vehicle or other objects which enter a

pre-defined virtual region from the outside place, and some certain actions can be taken when the

alarm is triggered.

Step 1 Enter the VCA settings interface.

Menu> Camera> VCA

Step 2 Select the camera to configure the VCA.

You can click the checkbox of Save VCA Picture to save the captured pictures of VCA

detection.

Step 3 Select the VCA detection type to Region Entrance Detection.

Step 4 Check the Enable checkbox to enable this function.

Step 5 Click to configure the trigger channel, arming schedule and linkage actions for the

region entrance detection alarm.

Step 6 Click the Rule Settings button to set the sensitivity of the region entrance detection.

HIKVISION DS-7104HGHI-F1 Specifications

General

HIKVISION DS-7104HGHI-F1 User Manual

Other manuals for HIKVISION DS-7104HGHI-F1