Digital Video Recorder User Manual
223
Figure 13-15 Array Settings Interface
Step 2 Select an array and click to delete the array.
Figure 13-16 Confirm Array Deletion
Step 3 In the pop-up message box, click Yes button to confirm the array deletion.
Deleting array will cause to delete all the data in the array.
13.4 Checking and Editing Firmware
Purpose
You can view the information of the firmware and set the background task speed on the Firmware
interface.
Step 1 Enter the Firmware interface to check the information of the firmware, including the
version, maximum physical disk quantity, maximum array quantity, auto-rebuild status, etc.
Figure 13-17 Firmware Interface
Step 2 You can set the Background Task Speed in the drop-down list.
Step 3 Click the Apply button to save the settings.
To Next Page
Loading...
