Digital Video Recorder User Manual
106
The interval is the time period between two capturing actions. You can configure all the
parameters on this menu on your demand.
5.2 Configuring Recording and Capture Schedule
The DS-7100 models support continuous, motion and event triggered recording types, and
other models support continuous, alarm, motion, motion | alarm, motion & alarm, event
and POS triggered recording types.
In this chapter, we take the record schedule procedure as an example, and the same
procedure can be applied to configure schedule for both recording and capture. To schedule
the automatic capture, you need to choose the Capture tab in the Schedule interface.
Purpose
Set the record schedule, and then the camera will automatically start/stop recording according to
the configured schedule.
Step 1 Enter the Record Schedule interface.
Menu > Record/Capture > Schedule
Figure 5-8 Record Schedule
Different recording types are marked in different color icons.
Continuous: scheduled recording.
Event: recording triggered by all event triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
To Next Page
Loading...
Need help?
General
