HIKVISION DS-7104HGHI-F1 User Manual

Digital Video Recorder User Manual
151
Chapter 8 Alarm Settings
8.1 Setting Motion Detection
Step 1 Enter Motion Detection interface of Camera Management and choose a camera you want
to set up motion detection.
Menu> Camera> Motion
Figure 8-1 Motion Detection Setup Interface
Step 2 Set detection area and sensitivity.
Check checkbox to enable motion detection. Use the mouse to draw detection area(s)
or click Full Screen to set the detection area to be the full screen and drag the sensitivity
bar to set sensitivity.
Click to set alarm response actions.
Figure 8-2 Set Detection Area and Sensitivity

HIKVISION DS-7104HGHI-F1 Specifications

General

Video Compression	H.264
Video Input	4 channels
Audio Input	1 channel
Audio Output	1 channel
HDD Interface	1 SATA interface
HDD Capacity	Up to 6TB
USB Interface	2 × USB 2.0
Power Supply	12 VDC
Operating Temperature	-10 °C to +55 °C
Operating Humidity	10% to 90%
Video Output	1 VGA, 1 HDMI
Network Interface	1 RJ45 10M/100M Ethernet interface