Name: HIKVISION DS-7104HGHI-F1
Brand: HIKVISION
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Digital Video Recorder User Manual

251

Step 5 Click the Upgrade button to start upgrading.

Step 6 After the upgrading is complete, reboot the DVR to activate the new firmware.

16.5.2 Upgrading by FTP

Before you start

Configure PC (running FTP server) and DVR to the same Local Area Network. Run the 3

-party

TFTP software on the PC and copy the firmware into the root directory of TFTP.

Step 1 Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Step 2 Click the FTP tab to enter the Local Upgrade interface, as shown in Figure 16-8.

Figure 16-8 FTP Upgrade Interface

Step 3 Enter the FTP Server Address in the text field.

Step 4 Click the Upgrade button to start upgrading.

Step 5 After the upgrading is complete, reboot the DVR to activate the new firmware.

16.6 Restoring Default Settings

Step 1 Enter the Default interface.

Menu > Maintenance > Default

Figure 16-9 Restore Defaults

Step 2 Select the restoring type from the following three options.

Restore Defaults: Restore all parameters, except the network (including IP address, subnet

mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account

parameters, to the factory default settings.

Other manuals for HIKVISION DS-7104HGHI-F1

Questions and Answers:

Need help?

Do you have a question about the HIKVISION DS-7104HGHI-F1 and is the answer not in the manual?

General