DS-7108HI-S series Net DVR User Manual
35
In “Camera” menu you can adjust the position where you want Date to display, move active
frame to “Position” item on the right side of “Date OSD” item and press enter button. Then you
will see the picture below. Use [↑] [↓] [←] [→] to adjust the position of date. As Shown Fig. 5.12:
Fig. 5.12 Set position of Data & Time
5.6 Video Parameters Setup
For different camera and different background, in order to get the best video image, you need
to adjust video parameters such as brightness, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters of one
camera to any other cameras. Here are the setup steps:
Step 1: Enter “Camera”, select a camera then enter “Color setup” menu. Shown as Fig.5.13
below
Fig. 5.13 Color setup
To Next Page
Loading...
