HIKVISION DS-7108HI-S Series User Manual

DS-7108HI-S series Net DVR User Manual
28
Fig. 5.2 User management
In the user name list box, only “admin” is existed. You can use [→] key, move “Active
Frame” to password edit box, and press [EDIT] key to enter edit status. Press numeric keys to
input the new password. The password is only combined by 16 numerals at most. After finish
inputting password, you need to press [ENTER] key to exit. Move “Active Frame” to “Verify
password” edit box, input the verify password. Move “Active Frame” to “Confirm” button, and
press [ENTER], if password and verify password are the same, the password will be saved and
taken into effective.
If password and verify password are not same, a warning message box will pop up. Shown as
Fig.5.3 below
Fig. 5.3 password error
In this case, press [ENTER] to return password edit box, and input new password again.
5.2 Add and Delete User
Enter “User Management” interface.
Add user
The steps are following:

HIKVISION DS-7108HI-S Series Specifications

General

Brand	HIKVISION
Model	DS-7108HI-S Series
Category	DVR
Language	English