DS-7108HI-S series Net DVR User Manual
32
Fig. 5.8 System Info
There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move
“Active Frame” to unit name edit box, press [EDIT] key to enter edit status, you can modify the
unit name. Please refer to chapter 3.4 about how to input characters. Press [ENTER] key to finish
modification. Select “Confirm” button and press [ENTER], you can save the new unit name and
make it become effective. Press “Cancel” button or [ESC] key to invalidate modification.
Device ID:
Fig. 5.9 Display menu
When using IR control to operate DVR, you must use device ID to select DVR. The default
device ID of DVR is “255”. If there are more than one DVR in one place, please define different
device ID for each DVR. Otherwise, the IR control will control all DVR with the same device ID
at a time.
In “Display” menu, move “Active Frame” to the device ID edit box, in the edit status, you
can use numeric keys to input new device ID. The device ID value is ranged among 01-255.
After you finish the modification, press “Confirm” button to save and take effect or press
“Cancel” to invalidate modification.
To Next Page
Loading...
Need help?
General