Need help?Do you have a question about the HIKVISION DS-7216HGHI-F1/N and is the answer not in the manual?
General| Video Input | 16 Channels |
|---|---|
| Video Output | 1 HDMI, 1 VGA |
| Compression | H.264 |
| Audio Output | 1 channel |
| Recording Resolution | 720p |
| Storage | 1 SATA interface |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
| Power Supply | 12 VDC |
| Audio Input | 1 channel |
| USB Interface | 2 USB 2.0 |
Provides procedures for safely starting up, shutting down, and rebooting the DVR.
Explains the initial device activation process, including setting an admin password.
Guides through the initial setup wizard for basic DVR configuration.
Explains how to activate and add online IP cameras to the DVR system.
Details configuring video encoding parameters like resolution, frame rate, and bitrate.
Explains how to set recording and capture schedules for cameras.
Details setting motion detection parameters and configuring alarm response actions.
Explains how to configure recording and capture triggered by alarm inputs.
Details configuring recording and capture for various VCA events.
Covers various methods for playing back recorded files: instant, normal, event, tag, smart, logs, sub-periods, external, and pictures.
Explains how to back up record files using normal video/picture search and event search.
Details configuring motion detection parameters, including area, sensitivity, and response actions.
Explains how to set up handling methods for external sensor alarms.
Describes how to detect video loss and configure alarm response actions.
Details configuring video tampering detection and alarm response actions.
Details configuring alarm response actions such as full-screen monitoring and notifications.
Details configuring face detection rules, sensitivity, and response actions.
Describes setting line crossing detection rules, direction, and sensitivity.
Details configuring intrusion detection rules, threshold, sensitivity, and percentage.
Covers configuring general network parameters like IP address and working mode.
Details configuring advanced network settings like PPPoE, Cloud P2P, and DDNS.
Explains how to check network status, test delay, packet loss, and export packets.
Details enabling and creating RAID arrays using one-touch or manual configuration.
Explains how to initialize newly installed HDDs before use.
Details adding and configuring NAS or IP SAN disks as network HDDs.
Explains how to check the status of installed HDDs for maintenance.
Covers configuring HDD error alarms for Uninitialized or Abnormal status.
Details upgrading DVR firmware using a local backup device or FTP server.
Details managing user accounts, including adding, deleting, editing, and assigning permissions.
Offers solutions for common issues like no display, beep sounds, and stuck live view.
To Next Page
