Need help?Do you have a question about the HIKVISION DS-7216HGHI-F1 and is the answer not in the manual?
General| Audio input | 1 |
|---|---|
| BNC input ports | 16 |
| Video input channels | 16 channels |
| USB 2.0 ports quantity | 2 |
| DC voltage | 12 V |
| Power consumption (typical) | 20 W |
| Bit rate | 64 Kbit/s |
| Internal | No |
| Product color | Black |
| Video streaming | Yes |
| Maximum frame rate | 30 fps |
| Audio formats supported | G.711 μ-law |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264, H.264+ |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Number of users | 128 user(s) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | SATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 222 mm |
|---|---|
| Width | 260 mm |
| Height | 45 mm |
| Weight | 1200 g |
Provides instructions for the proper startup and shutdown procedures of the DVR.
Provides steps for setting PTZ parameters before controlling a PTZ camera.
Guides on setting up video encoding parameters for recording.
Explains how to set automatic recording and capture schedules.
Covers various methods for playing back recorded video files.
Provides instructions for backing up recorded files to external devices.
Details how to configure motion detection parameters and response actions.
Covers basic network configuration like IP address and working mode.
Guides on setting up RAID arrays for enhanced data redundancy.
Provides instructions for initializing newly installed HDDs.
Provides instructions for upgrading the DVR firmware via backup device or FTP.
Explains how to restore DVR parameters to factory default settings.
Offers solutions for common issues like no display or audio problems.
To Next Page
