Need help?Do you have a question about the HIKVISION DS-7216HQI-K2 and is the answer not in the manual?
General| Video Output | 1 HDMI, 1 VGA |
|---|---|
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Two-Way Audio | Yes |
| HDD Slots | 2 |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12V DC |
| Operating Humidity | 10% to 90% |
| Video Input | 16-ch |
| HDMI Output | 1-ch, 4K (3840 × 2160)/30Hz |
| VGA Output | 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
| Recording Resolution | 1080p/720p/VGA/4CIF/CIF |
| Playback Resolution | 4 MP/3 MP/1080p/720p/VGA/4CIF/CIF |
| Audio Compression | G.711 |
| Audio Input | 1 channel |
| Audio Output | 1-ch |
| Max HDD Capacity | 10TB per HDD |
| Network Interface | 1 × RJ45 10M/100M/1000Mbps |
| Working Temperature | -10°C to +55°C (14°F to 131°F) |
Features for network connectivity, protocols, and remote access.
Configuring camera presets, patrol paths, and movement patterns.
Settings for video encoding, resolution, bitrate, and quality.
Setting up schedules for automatic video recording.
Setting up recording triggered by motion detection events.
Configuring recording and capture based on alarm inputs.
Configuring recording for various events like motion, alarm, and VCA.
Enabling redundant recording for enhanced data safety.
Methods for playing back recorded video and picture files.
Setting motion detection parameters, areas, and sensitivity.
Setting up face detection parameters and alarm actions.
Configuring line crossing detection rules and sensitivity.
Setting up intrusion detection rules, sensitivity, and thresholds.
Configuring region entrance detection rules and sensitivity.
Setting up audio exception detection rules.
Searching for recorded video based on detected faces.
Searching for recorded video based on analyzed behaviors.
Setting up basic network parameters like IP address and DNS.
Advanced network configuration options.
Steps to initialize newly installed hard disk drives.
To Next Page
