Need help?Do you have a question about the HIKVISION DS-7216HGHI-E1 and is the answer not in the manual?
General| Video Input | 16 channels |
|---|---|
| Video Compression | H.264 |
| Video Output | 1 VGA, 1 HDMI |
| Storage | 1 SATA interface |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
| Power Supply | 12 VDC |
| Audio Output | 1 channel, RCA |
| USB Interface | 2 USB 2.0 |
| Power Consumption | ≤ 15W |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| Audio Input | 1-ch |
Offers practical advice on installation environment, usage, and maintenance to prevent damage and ensure safe operation.
Explains the process of initializing a newly installed HDD before it can be used with the DVR.
Details the procedure for setting PTZ parameters before controlling the PTZ camera.
Describes how to set and call PTZ presets, patrols, and patterns for automated camera movements.
Explains how to access and use the PTZ control panel for camera manipulation.
Covers configuration of video encoding parameters like stream type, resolution, and bitrate.
Details how to set schedules for recording and capture, including continuous, event, and motion-triggered types.
Explains how to set motion detection parameters and configure response actions for detected events.
Describes configuration of recording and capture triggered by alarm inputs.
Covers configuration of recording and capture triggered by various VCA events like face detection and line crossing.
Explains how to set up manual recording and continuous capture, overriding scheduled settings.
Explains how to enable redundant recording for enhanced data safety and reliability.
Describes methods to protect recorded files by locking or setting HDD to read-only.
Covers playback of record files via instant, normal search, event search, tag, smart search, logs, sub-periods, external files, and pictures.
Details backing up record files using normal search, event search, and video clips export.
Details how to set motion detection parameters, including detection area, sensitivity, and response actions.
Explains how to set up handling methods for external sensor alarms, including trigger channels and arming schedules.
Describes how to detect video loss in a channel and configure alarm response actions.
Covers triggering alarms when the camera lens is covered and setting response actions.
Details how to configure handling methods for various exceptions like HDD full, network disconnected, and IP conflict.
Describes available alarm response actions such as full-screen monitoring, audible warning, and email notifications.
Covers configuration of POS settings, including privacy information filtering and protocol selection.
Details how to set POS alarm parameters to trigger channels for recording or monitoring.
Covers configuration of face detection function, including trigger channels, arming schedules, and linkage actions.
Covers basic network configuration including NIC type, IP address, gateway, and DNS settings.
Covers configuring RAID arrays using one-touch or manual methods for data redundancy.
Covers adding, deleting, and editing user accounts with specified permissions.
Offers solutions for common issues such as no image display, device beeping, and live view sticking.
To Next Page
