Need help?Do you have a question about the HIKVISION DS-7216HQHI-F2/N and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Certification | CE |
| Product color | White |
| Rack capacity | 1U |
| Channels quantity | 16 channels |
| Maximum frame rate | 30 fps |
| Audio output channels | 2.0 channels |
| Audio formats supported | G.711 |
| Multi-display supported | Yes |
| Network connection type | RJ-45 |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264 |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video in | BNC |
| Video out | HDMI, VGA |
| Audio input | 1x RCA |
| BNC input ports | 16 |
| USB 2.0 ports quantity | 2 |
| Number of users | 128 user(s) |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power requirements | DC |
| Power consumption (max) | 30 W |
Weight and Dimensions| Weight | 2000 g |
|---|---|
| Dimensions (WxDxH) | 380 x 320 x 45 mm |
Guidelines for safe installation, operation, and maintenance of the device.
Features related to managing storage disks, including capacity and properties.
Functions for recording, capturing images, and playing back data.
Details on network interfaces, protocols, and remote access capabilities.
Procedure for setting up PTZ camera parameters before control.
Setting up recording parameters like stream type, resolution, and bitrate.
Setting up motion detection parameters and alarm response actions.
Methods to protect recorded files by locking or setting HDD property.
Detailed procedures for playing back recorded video files by various search methods.
Steps for backing up record files and video clips to external devices.
Configuring motion detection parameters, areas, and response actions.
Configuring actions such as full-screen monitoring, audible warnings, and notifications.
Setting up basic network parameters like IP address and working mode.
Configuring advanced network features like PPPoE, Hik Cloud P2P, DDNS, NTP, NAT.
Essential step to prepare a new hard disk drive for use with the DVR.
Updating the DVR firmware using local backup devices or FTP server.
Solutions for common issues like no image display or device startup problems.
To Next Page
