HIKVISION DS-7216HQHI-F2/N - 17.5 Managing User Accounts

Digital Video Recorder User Manual
259
Figure 17-13 Disable Enhanced VCA Mode (2)
3) Click Yes to apply the function and reboot the device.
If you have configured 2K/4K output, or connected 4 MP/5 MP signal input already, when you
enable enhanced VCA mode and after the device reboots, the output resolution will decrease to
1080p, and the 4 MP/5 MP signal input will display no video.
Step 4 Click the Apply button to save the settings.
17.5 Managing User Accounts
Purpose
There is a default account in the DVR: Administrator. The Administrator user name is admin and
the password is set when you start the device for the first time. The Administrator has the
permission to add and delete user and configure user parameters.
17.5.1 Adding a User
Step 1 Enter the User Management interface.
Menu >Configuration>User
Figure 17-14 User Management Interface
Step 2 Click the Add button to enter the Add User interface.