HIKVISION DS-7216HUHI-K2 - Page 9

Digital Video Recorder User Manual
8
Recording and Playback
 Holiday recording schedule configuration;
 Cycle and non-cycle recording modes;
 Normal and event video encoding parameters;
 Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm
and event;
 Supports POS triggered recording for DS-7300HQHI series DVR;
 8 recording time periods with separated recording types;
 Supports Channel-Zero encoding;
 Main stream and sub-stream configurable for simultaneous recording;
 Pre-record and post-record for motion detection triggered recording, and pre-record time for
schedule and manual recording;
 Searching record files by events (alarm input/motion detection);
 Customization of tags, searching and playing back by tags;
 Locking and unlocking of record files;
 Local redundant recording;
 When Turbo HD, AHD, or HDCVI input is connected, the information including the resolution
and frame rate will be overlaid on the bottom right corner of the live view for 5 seconds.
When CVBS input is connected, the information such as NTSC or PAL will be overlaid on the
bottom right corner of the live view for 5 seconds.
 Searching and playing back record files by camera number, recording type, start time, end time,
etc.;
 Smart playback to go through less effective information;
 Main stream and sub-stream selectable for local/remote playback;
 Zooming in for any area when playback;
 Multi-channel reverse playback;
 Supports pause, fast forward, slow forward, skip forward, and skip backward when playback,
locating by dragging the mouse on the progress bar;
 4/8/16-ch synchronous playback.
Backup
 Exports data by a USB, and SATA device;
 Exports video clips when playback;
 Video and Log, Video and Player, and Player are selectable to export for backup;
 Management and maintenance of backup devices.
Alarm and Exception