Network Video Recorder User Manual
101
Advanced Interface
Step 2 Check the checkbox of 1080P Lite Mode and click Apply to pop up the attention box. After
enabling 1080p lite mode, the 3 MP signal is not accessible to analog channel.
Step 3 Click Yes in popup message box to reboot the device to have new settings taken effect.
Disable the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.
Step 2 Uncheck the checkbox of 1080P Lite Mode and click Apply. The following attention box
pops up.
Step 3 Click Yes in popup message box to reboot the device to activate the new settings or No to
restore the old settings.
To Next Page
Loading...
Need help?
General