Need help?Do you have a question about the HIKVISION DS-7208HQI-K2 and is the answer not in the manual?
General| Video Input | 8 channels |
|---|---|
| HDMI Output | 1 |
| VGA Output | 1 |
| Recording Resolution | Up to 1080p |
| Playback Resolution | Up to 1080p |
| Encoding Resolution | Up to 1080p |
| HDD Capacity | Up to 6TB |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| Weight | 1.5 kg |
| Audio Input | 1 channel, RCA |
| Audio Output | 1-ch, RCA (Linear, 1 KΩ) |
| Hard Drive Support | 1 SATA |
| Network Interface | 1 |
| USB Interface | 2 |
Guides on properly starting, shutting down, and rebooting the DVR device.
Steps for initial device activation, including setting an admin password.
Instructions for adding and configuring IP cameras to the DVR system.
Setting parameters for video encoding, resolution, bitrate, and quality.
Methods for playing back recorded video files by channel, time, or event.
Steps to back up video and picture files to USB devices.
Configuring motion detection parameters and response actions.
Setting up IP address, gateway, DNS, and other basic network parameters.
Enabling and setting up Hik-Connect for mobile and web remote access.
Steps to initialize newly installed HDDs before they can be used.
Solutions for common problems like no image, beeping sounds, or no audio.
To Next Page
