Need help?Do you have a question about the HIKVISION DS-7208HQHI-SH and is the answer not in the manual?
General| Video Input | 8 Channels |
|---|---|
| Compression | H.265+/H.265/H.264+/H.264 |
| Audio Output | 1 channel |
| Power Supply | 12V DC |
| Operating Temperature | -10 °C to +55 °C (14 °F to 131 °F) |
| Operating Humidity | 10% to 90% |
| Video Output | HDMI, VGA |
| Storage | 1 SATA interface |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
| USB Interface | 2 USB 2.0 |
Details physical interfaces and indicators on the front panel.
Explains how to use the IR remote control for device operation.
Describes how to use a USB mouse for device control and navigation.
Explains the on-screen keyboard and input methods for the device.
Details the rear panel interfaces for connectivity and power.
Covers crucial procedures for powering the device on and off safely.
Guides through initial system setup using the on-screen wizard.
Explains how to add and manage IP cameras for live view and recording.
Provides an overview of the live video display and its key interface elements.
Details various ways to interact with the live video feed using different controls.
Covers customization of display modes, dwell times, and audio for live view.
Guides on setting up parameters for Pan, Tilt, and Zoom cameras.
Explains how to define and manage camera movement sequences for PTZ.
Details the interface for manual control of PTZ cameras.
Covers settings for video stream quality, resolution, and encoding format.
Explains how to set up automatic recording based on time and events.
Details how to set up recording triggered by motion detection events.
Outlines methods for accessing and reviewing recorded video footage.
Covers advanced playback features like frame-by-frame and smart search.
Details procedures for saving recorded video data to external storage devices.
Covers operations related to USB drives, HDDs, and writers used for backup.
Configures detection zones, sensitivity, and actions for motion events.
Details how to configure handling methods for external sensor alarm inputs.
Explains how to manage and respond to various system exceptions and errors.
Defines actions like alerts, notifications, and recording triggered by alarms.
Covers basic network parameters like IP address, subnet, and gateway.
Details advanced network configurations like PPPoE, DDNS, and email alerts.
Allows monitoring of real-time network data flow and connection status.
Covers tools for testing network delay, packet loss, and status.
Covers the essential process of preparing new hard drives for use with the DVR.
Explains how to add and manage NAS or IP SAN storage as network HDDs.
Details how to organize multiple HDDs into groups for recording.
Allows setting specific storage quotas for individual cameras on the HDD.
Provides methods to monitor the operational status and health of installed HDDs.
Covers on-screen display settings like date, time, and camera names.
Explains how to mask sensitive areas within the camera's view from recording.
Details how to adjust image settings like brightness, contrast, and sharpness.
Provides access to details about the DVR's hardware, software, and connected devices.
Covers how to retrieve and save system logs for auditing and troubleshooting.
Details the process for updating the DVR's firmware via backup device or FTP.
Explains how to reset the DVR to its factory default configuration.
Covers settings for the RS-232 serial port for device configuration and control.
Allows adjustment of general system parameters like language and display output.
Details how to add, delete, and manage user access and permissions on the DVR.
Explains procedures for logging out, shutting down, or rebooting the DVR.
Provides definitions for technical terms and acronyms used in the manual.
Offers solutions for common issues encountered during device operation.
Lists IP cameras that are verified to work with the DVR.
To Next Page