Need help?Do you have a question about the HIKVISION DS-7208HWI-SH and is the answer not in the manual?
General| Product color | Black |
|---|---|
| USB connectivity | Yes |
| Channels quantity | 8 channels |
| Video capturing speed | 30 fps |
| Total storage capacity | 8000 GB |
| Video compression formats | H.264 |
| Analog signal format system | NTSC, PAL |
| Playback resolutions supported | 1920x1080, 1280x1024, 1280x720, 1024x768 |
| Display resolution | 960 x 576 pixels |
| BNC input ports | 8 |
| BNC output ports | 1 |
| USB 2.0 ports quantity | 2 |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | NTP, SMTP, NFS, UPnP, iSCSI |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 4000 GB |
| Power requirements | 12 VDC |
| Power consumption (typical) | 15 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Dimensions (WxDxH) | 445 x 290 x 45 mm |
|---|
Steps and guidelines for installing the DVR hardware and connecting cables.
Procedure for installing a hard disk drive (HDD) into the DVR unit.
Details the front panel layout and button functions for DS-7200 and DS-7300 series DVRs.
Details the front panel layout and button functions for the DS-8100 series DVR.
Describes the rear panel connectors for DS-7200 series DVR models.
Describes the rear panel connectors for DS-7224/7332 series DVR models.
Describes the rear panel connectors for DS-7300 series DVR models.
Describes the rear panel connectors for DS-8100 series DVR models.
Instructions for wiring alarm input and output interfaces.
Guide for connecting RS-485 devices like pan/tilt units to the DVR.
Technical specifications for various DS-7200 series DVR models.
Technical specifications for various DS-7300 series DVR models.
Technical specifications for various DS-8100 series DVR models.
Procedures for safely starting up and shutting down the DVR unit.
Guide to configuring initial device settings using the setup wizard.
Overview of the live view interface, icons, and basic mouse operations.
Steps to switch between main and auxiliary video outputs.
Interface and steps for adding and managing IP cameras on the DVR.
Setting up continuous and motion detection recording for all channels.
Accessing and managing recorded video files for playback.
Steps to back up recorded video files to external storage devices.
To Next Page