Need help?Do you have a question about the HIKVISION DS-7208HGHI-K1 and is the answer not in the manual?
General| DC voltage | 12 V |
|---|---|
| Power consumption (typical) | 17 W |
| Ethernet LAN | Yes |
| Number of users | 64 user(s) |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| BNC input ports | 8 |
| Video input channels | 8 channels |
| USB 2.0 ports quantity | 2 |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Audio system | 2-way |
| Product color | Black |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264, H.264+, H.265, H.265 Pro, H.265 Pro+ |
| Playback resolutions supported | 1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768 |
| HDD interface | SATA, SATA II, SATA III |
| Maximum HDD capacity | 4000 GB |
Weight and Dimensions| Depth | 222 mm |
|---|---|
| Width | 260 mm |
| Height | 45 mm |
| Weight | 1000 g |
Product provided "as is" with no warranties; use is at your own risk; limitation of liability.
Covers power connection, earthing, unstable locations, temperature, disposal, and maintenance safety.
Hazards associated with battery handling, replacement, and disposal due to explosion or burn risks.
Guidelines for safe operation, including power supply, socket-outlet usage, fan/motor safety, and data erasure.
Steps to activate the device with a password and set initial parameters.
How to log in via unlock pattern or password, including interface details and security recommendations.
How to configure PTZ parameters, presets, patrols, and custom movement patterns.
Covers GUI, normal playback, controls, and timeline usage for reviewing recorded video.
How to play back event-specific footage, clip videos, and use backup devices.
How to search for individuals using face pictures, including setup and similarity parameters.
General network setup for device connectivity, including IP, DNS, DHCP, and Wi-Fi settings.
Steps to enable and use Hik-Connect for remote device access and management.
Configuring email settings for event notifications and testing.
Configuring motion detection features, including areas, sensitivity, and targets.
Setting alarm linkage actions, defining schedules, and managing events.
Setting up continuous and event recording schedules, including editing time periods.
Setting up TCP/IP, DDNS, PPPoE, NAT, Wi-Fi, NTP, and log server settings.
Configuring video tampering, video loss, alarm inputs, and alarm outputs.
Configuring line crossing, intrusion, region entrance, and region exiting detection.
Configuring face recognition, capture, library management, and picture uploading.
Setting recording parameters like main stream, sub-stream, frame rate, resolution, and bitrate.
To Next Page