HIKVISION DS-7208HGHI-K1 User Manual

Note
●
Ensure the selected cameras are acvated.
●
When the network camera is online, you can double click camera name to edit it.
4.
Select a network camera, and click Add to add it.
Add Network Camera Manually
Add the network cameras to your video recorder.
Before You Start
●
Ensure your network camera is on the same network segment with that of your video recorder.
●
Ensure the network
connecon is valid and correct.
●
Ensure the network camera is acvated.
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click .
Figure 6-12 Add IP Camera
3.
Enter network camera parameters.
Use Camera Acvaon Password
If it is enabled, the video recorder will add the camera by the set channel default password.
4.
Click Add.
Digital Video Recorder User Manual
50

HIKVISION DS-7208HGHI-K1 Specifications

General

DC voltage	12 V
Power consumption (typical)	17 W
Ethernet LAN	Yes
Number of users	64 user(s)
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Audio system	2-way
Product color	Black
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro, H.265 Pro+
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
HDD interface	SATA, SATA II, SATA III
Maximum HDD capacity	4000 GB

Weight and Dimensions

Depth	222 mm
Width	260 mm
Height	45 mm
Weight	1000 g