HIKVISION DS-7208HGHI-K1

6.5.3 Storage Device
Inialize HDD
If it is the rst me you use your HDD, please inialize it aer it is installed.
Before You Start
Install at least an HDD to your video recorder.
Steps
1.
Go to
Conguraon → Record → Storage .
2.
Select an HDD.
3.
Click Init.
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1.
Go to Conguraon → Record → Storage .
2.
Click Add.
3.
Set NetHDD.
4.
Set Type as NAS or IP SAN.
5.
Enter NetHDD IP address.
6.
Click
to search the available disks.
Digital Video Recorder User Manual
74