Need help?Do you have a question about the HIKVISION DS-7208HGHI-E1 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| HDD Bays | 1 |
| Max HDD Capacity | 6TB |
| Video Compression | H.264 |
| Resolution | 1080p |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| Video Input | BNC |
| Video Output | 1 channel HDMI, 1 channel VGA |
| Audio Output | 1CH (RCA) |
| Network Interface | 1 RJ45 10M / 100M Ethernet interface |
| USB Interface | 2 USB 2.0 |
Step-by-step guidance through the initial setup wizard for essential parameters.
Procedure to activate IP cameras before adding them to the system.
How to set and configure PTZ parameters for controlling camera movement.
Steps to set specific camera positions as presets for event-triggered actions.
Setting up patrol paths for PTZ cameras to move between key points with specified durations.
Recording and setting up PTZ camera movement patterns for automated operation.
Setting video and audio encoding parameters for recording, including resolution, bitrate, and stream type.
Accessing and playing back recorded video and picture files stored on the device.
Procedures for backing up recorded video files and pictures to external storage devices.
Backing up files found through normal search criteria using USB or SATA devices.
Configuring motion detection parameters, including area, sensitivity, and response actions.
Setting up Point of Sale (POS) integration for overlaying transaction data on video.
Configuring face detection functionality to identify and react to faces in the surveillance scene.
Searching for detected face pictures and playing related video files based on specified conditions.
Configuring essential network settings like IP address, gateway, and DNS for network operation.
Setting up RAID arrays by combining multiple disk drives for redundancy and performance.
Initializing newly installed Hard Disk Drives (HDDs) before they can be used by the DVR.
To Next Page
