HIKVISION DS-7208HGHI-E1 - 2.7 Configuring the Signal Input Channel

Digital Video Recorder User Manual
74
Figure 2-44 Network Configuration of the Camera
Step 4 You can edit the network information and the password of the camera.
Figure 2-45 Password Configuration of the Camera
Step 5 Click OK to save the settings and exit the interface.
2.7 Configuring the Signal Input Channel
For -E series DVR, there is no signal input configuration interface.
Purpose
For all the -F series DVR, you should configure the analog and IP signal input types.
Step 1 Enter the Signal Input Status interface.
Menu > Camera > Signal Input Status