Do you have a question about the HIKVISION DS-7208HI-SL and is the answer not in the manual?
Video Input | 8 channels |
---|---|
Video Input Connector | BNC |
Compression | H.264 |
Operating Temperature | -10°C to +55°C |
Operating Humidity | 10% to 90% |
Audio Output | 1 channel |
Hard Drive Support | 1 SATA interface |
Network Interface | 1 RJ45 10M/100M Ethernet interface |
USB Interface | 2 USB 2.0 |
Power Supply | 12 VDC |
Power Consumption | ≤ 10W (without HDD) |
Weight | 1.5kg |
Audio Input | 1 channel |
Frame Rate | 25 fps |
Overview of device capabilities like video compression and encoding.
Features for live view, HDMI/VGA output, and screen display.
Details on connecting and managing hard disk drives.
Functions for setting up recordings and reviewing footage.
Capabilities for remote access and network connectivity.
Procedures for powering the device on, off, and rebooting.
Steps to set the initial administrator password for security.
Guided setup process for essential device parameters.
Functions and controls available during live viewing.
Customizing display parameters for the live view.
Setting up parameters for Pan-Tilt-Zoom camera control.
Programming camera movements and sequences.
Setting video stream, resolution, and bitrate for recordings.
Scheduling recording times and types for cameras.
Setting up recordings triggered by motion detection events.
Initiating and managing manual recording sessions.
Setting specific recording schedules for holidays.
Locking recorded files to prevent overwriting.
Accessing and viewing recorded video footage.
Viewing recordings for a specific camera channel.
Retrieving recordings based on specific date and time.
Searching and playing back files by recording type and time.
Finding and viewing recordings related to specific events.
Procedures for exporting and saving recorded data.
Configuring motion detection parameters and areas.
Setting up basic network parameters like IP address and DNS.
Preparing newly installed hard disk drives for use.