Need help?Do you have a question about the HIKVISION DS-7208HQHI-K1 and is the answer not in the manual?
General| BNC input ports | 1 |
|---|---|
| Video input channels | 8 channels |
| USB 2.0 ports quantity | 2 |
| Power consumption (typical) | 7.5 W |
| Voltage | 12 V |
| Product color | Black |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| Analog signal format system | NTSC, PAL |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1780 g |
|---|---|
| Dimensions (WxDxH) | 315 x 242 x 45 mm |
Steps for initial device setup and creating an admin password.
Setting video compression, resolution, bitrate, and frame rate for recording.
Accessing and reviewing recorded video footage.
Procedures for saving recorded video and data to external storage.
Exporting search results to USB or other backup devices.
Configuring motion detection parameters like area, sensitivity, and response actions.
Configuring the system to detect and react to faces captured by cameras.
Setting up detection rules for vehicles, including license plate capture.
Configuring virtual lines to detect objects crossing them in specified directions.
Setting up virtual regions to detect objects entering or loitering within them.
Setting up basic network parameters like IP address, gateway, and DNS.
Enabling remote access via the Hik-Connect service and mobile app.
Preparing newly installed hard drives for use by the DVR.
Common issues and solutions for device operation.
To Next Page