Need help?Do you have a question about the HIKVISION DS-7208HUI-K2 and is the answer not in the manual?
General| Analog Video Input | 8 channels |
|---|---|
| HDTVI Input | 8 channels |
| AHD Input | 8 channels |
| HDCVI Input | 8 channels |
| CVBS Input | 8 channels |
| Audio Output | 1 channel |
| Two-Way Audio | Yes |
| Dual Stream | Yes |
| SATA | 2 SATA interfaces |
| USB Interface | Front panel: 1 × USB 2.0; Rear panel: 1 × USB 3.0 |
| Power Supply | 12V DC |
| Working Temperature | -10 °C to +55 °C (14 °F to 131 °F) |
| Channels | 8 |
| Operating Humidity | 10% to 90% |
| Video Compression | H.265/H.264 |
| Video Output | HDMI, VGA |
| HDMI Output | 1 channel |
| VGA Output | 1 channel |
| Recording Resolution | 8 MP/5 MP/4 MP/1080p/720p |
| Stream Type | Video/Audio |
| Network Interface | 1 RJ45 10M/100M/1000Mbps |
| Capacity | Up to 10TB |
| HDD Capacity | Up to 10TB |
Describes the DVR's front panel components and how to operate it using the IR remote control.
Information on using a USB mouse and details of the DVR's rear panel connectors.
Procedures for correctly powering on, powering off, and rebooting the DVR.
Steps for initial activation, securing login with patterns, and password recovery.
Instructions for adding and connecting IP cameras to the DVR system.
Details on operating the Live View interface using mouse controls and available functions.
Managing video output modes and customizing Live View display settings.
Setting up PTZ camera parameters, including presets, patrols, and patterns.
Accessing and using the PTZ control interface for camera movement and functions.
Setting video encoding parameters and configuring recording schedules.
Configuring recording based on motion detection, alarms, and specific events.
Managing HDDs, protecting files, and configuring advanced encoding features.
Playing back recorded files using instant, normal, event, and smart search methods.
Utilizing functions like frame-by-frame playback, digital zoom, and multi-channel playback.
Procedures for backing up recorded files and managing backup storage devices.
Configuring motion detection, sensor alarms, and video loss/tampering detection.
Defining alarm actions and configuring system exception handling.
Setting up various VCA features like Face Detection, Line Crossing, and Intrusion Detection.
Performing searches for faces, behaviors, people counting, and heat map data.
Configuring basic and advanced network parameters including PPPoE and Hik-Connect.
Monitoring network traffic, delay, packet loss, and status.
Initializing HDDs, managing groups, and setting properties like redundancy.
Configuring cloud storage and checking HDD health and S.M.A.R.T. information.
Configuring OSD, privacy masks, and adjusting camera image parameters.
Viewing system info, searching logs, and managing configuration files.
Upgrading DVR firmware and restoring system to factory default settings.
Configuring general system parameters like language, time, and DST.
Managing user accounts, permissions, and login security.
Definitions of technical terms and acronyms used throughout the manual.
Guidance on diagnosing and resolving common problems with the DVR.
To Next Page
