Need help?Do you have a question about the HIKVISION DS-7208HUHI-F1/N and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Product color | Black |
| Rack capacity | 1U |
| Remote viewing | Yes |
| Channels quantity | 8 channels |
| Audio formats supported | G.711 |
| Maximum video resolution | 3840 x 2160 pixels |
| Video compression formats | H.264, H.264+ |
| Analog signal format system | NTSC, PAL |
| Playback resolutions supported | 3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Audio input | 4-ch, RCA |
| BNC input ports | 8 |
| BNC output ports | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power requirements | 12V DC |
| Power consumption (max) | 20 W |
Weight and Dimensions| Weight | 2000 g |
|---|---|
| Dimensions (WxDxH) | 315 x 242 x 45 mm |
Details network interface capabilities, protocols, and remote access features.
Details how to configure PTZ settings, including presets, patrols, and patterns.
Explains how to customize and call presets, patrols, and patterns for PTZ cameras.
Details how to configure recording parameters for main and sub-streams.
Explains how to set schedules for automatic recording and capture.
Details how to set up motion detection for triggering recording and other actions.
Explains how to configure recording and capture triggered by alarms.
Covers VCA events like face detection, intrusion detection for recording and capture.
Details methods for playing back recorded files, including instant and normal search.
Covers backing up record files using USB devices via normal or event search.
Configures motion detection parameters, including area, sensitivity, and response actions.
Configures face detection parameters, including rules, sensitivity, and linkage actions.
Detects illegal parking in specified areas and triggers alarm actions.
Enables vehicle detection for traffic monitoring, including license plate capture and FTP upload.
Detects unattended objects like baggage or purse in pre-defined regions.
Sets up virtual line detection for people, vehicles, and objects crossing a defined line.
Detects objects removed from pre-defined regions, such as exhibits on display.
Detects objects entering or loitering in a pre-defined virtual region and triggers actions.
Detects people or objects entering a pre-defined virtual region and triggers alarms.
Detects people or objects exiting a pre-defined virtual region and triggers alarms.
Detects people or objects loitering in a pre-defined virtual region and triggers alarms.
Triggers alarms when people gather in a pre-defined virtual region.
Detects fast movement of people or objects in a pre-defined virtual region and triggers alarms.
Searches for detected face pictures and plays related video files based on specified conditions.
Analyzes suspicious behavior based on VCA detection and triggers linkage methods.
Searches and views captured vehicle plate pictures and related information.
Calculates the number of people entering/leaving an area for daily, weekly, monthly, or annual reports.
Provides a graphical representation of customer visit and dwell times in a configured area.
Configures working mode, NIC type, IP address, gateway, MTU, and DNS server.
Covers PPPoE, Hik Cloud P2P, DDNS, NTP server, NAT, and more settings.
Offers solutions for common issues like no image display, beep sounds, and stuck playback.
To Next Page
