Need help?Do you have a question about the HIKVISION DS-7208HUHI-K1 and is the answer not in the manual?
General| Video input channels | 8 channels |
|---|---|
| USB 2.0 ports quantity | 1 |
| Ethernet LAN | Yes |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| Power consumption (typical) | 20 W |
| Voltage | 12 V |
| Product color | Black |
| Audio input channels | 4.0 channels |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| Analog signal format system | NTSC, PAL |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 8000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 2000 g |
|---|---|
| Dimensions (WxDxH) | 315 x 242 x 45 mm |
Lists general features of the DVR, including camera connectivity and stream support.
Provides step-by-step instructions for powering the device on and off safely.
Explains how to restart the DVR using the shutdown menu options.
Details the process of drawing and confirming a device unlock pattern.
Explains how to log in to the device using a previously configured unlock pattern.
Details the steps for entering username and password to access the device.
Explains how to activate an IP camera before adding it to the DVR system.
Details how to add detected online IP cameras to the DVR's connection list.
Details various functions available in the live view mode, like screen display and recording.
Guides on setting PTZ parameters before controlling PTZ cameras.
Explains how to set up and manage PTZ presets, patrols, and patterns.
Details how to set video compression, stream type, resolution, and bitrate for recording.
Covers recording parameters like pre/post-record time, file retention, audio recording, and stream selection.
Guides on setting up schedules for continuous, event, motion, or alarm-triggered recording.
Explains how to set up motion detection zones, sensitivity, and arming schedule.
Describes how to efficiently search and play back video based on VCA or motion events.
Guides on configuring motion detection parameters, including area, sensitivity, and arming schedule.
Explains how to configure handling methods for external sensor alarms.
Details how to detect video loss and configure alarm response actions.
Explains how to detect video tampering (lens covered) and configure alarm responses.
Describes how to configure handling methods for various system exceptions like HDD errors and network disconnections.
Details the actions to be taken when an alarm or exception occurs, such as full-screen monitoring or email notifications.
Explains how to configure face detection, including sensitivity and alarm linkage actions.
Guides on configuring vehicle detection for traffic monitoring, including lane settings and alarm triggers.
Details how to configure line crossing detection rules, including direction and sensitivity.
Explains how to set up intrusion detection zones, threshold, and sensitivity.
Explains how to search for captured face pictures and play related video files.
Covers configuring general network parameters like IP address, gateway, and DNS.
Guides on enabling and configuring Hik-Connect for remote mobile access and surveillance.
Explains how to set up email notifications for detected events like alarms or motion.
Provides steps for initializing a newly installed hard disk drive before it can be used.
Covers configuring alarms for HDD errors like Uninitialized or Abnormal status.
Explains how to configure privacy mask zones to obscure sensitive areas in the video feed.
Details how to search, view, and export log files for operations, alarms, and exceptions.
Guides on upgrading the DVR firmware using a local backup device or FTP server.
Details the process of upgrading the DVR firmware from a local backup device.
Covers restoring the DVR to factory default settings for parameters or inactive status.
Guides on managing user accounts, including adding, deleting, and editing user permissions.
Details the process of adding a new user account with specified permissions.
Offers solutions for common issues like no image display, beeping sounds, and video playback problems.
To Next Page