Digital Video Recorder User Manual 
 
82 
independent output configuration of DS-7608/7616HUHI-F/N and 
DS-7116/7216/7300/8100HQHI-F/N series), Auto and HDMI/VGA (for HGHI-F/N, HGHI-F, 
DS-7100/7200HQHI-F/N and DS-7200/7604HUHI-F/N series or simultaneous output configuration 
of DS-7608/7616HUHI-F/N and DS-7300/8100HQHI-F/N series) and then reboot the device to 
switch the main output.   
3.2.3  Quick Setting Toolbar in Live View Mode 
On the screen of each channel, there is a quick setting toolbar which shows when you click the 
screen. 
 
Figure 3-3 Quick Setting Toolbar 
You can refer to Table 3-5 for the description of Quick Setting Toolbar icons. 
Table 3-8 Description of Quick Setting Toolbar Icons 
Enable/Disable 
Manual Record 
   
Picture capture is applicable to DS-7300/8100/9000HUHI-F/N series DVR only. 
  Instant Playback only shows the record in last five minutes. If no record is found, it means 
there is no record during the last five minutes. 
  Digital Zoom can zoom in the selected area to the full screen. Click and draw to select the 
area to zoom in, as shown in Figure 3-4.