Digital Video Recorder User Manual
158
Figure 8-13 Set Arming Schedule of Video Tampering
3) Select Linkage Action tab to set alarm response actions of video tampering alarm (please
refer to Chapter 8.7 Setting Alarm Response Actions).
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
4) Click the OK button to complete the video tampering settings of the channel.
Repeat the above steps to finish settings of other channels, or click the Copy button copy
the above settings to them.
Step 5 Click the Apply button to save and activate the settings.
8.5 Setting All-day Video Quality Diagnostics
Purpose
The device provides two ways to diagnose the video quality: manual and all-day. Perform the
following steps to set the threshold of the diagnosing and the linkage actions.
Step 1 Enter Video Quality Diagnostics Settings interface of Camera Management and select a
channel you want to detect video tampering.
Menu> Camera> Video Quality Diagnostics
To Next Page
Loading...
