HIKVISION DS-7208HGHI-K1

Add Network Camera on Dierent Network Segment
If your network camera is on a dierent network segment, the device can search its IP address
within a range of IP addresses, and add it.
Before You Start
●
Ensure the network connecon is valid and correct.
●
Ensure the network camera password is the same as your video recorder.
Steps
1.
Go to Conguraon → Camera → Camera → IP Channel .
2.
Click Advanced Search.
3.
Enter Network Segment.
Figure 6-13 Enter Network Segment
4.
Click Add.
Add Network Camera Through Plug-and-Play
If an inacve network camera or third party ONVIF camera is connected to your network, the video
recorder may automacally detect and add the camera, or nofy you to manually add it.
Steps
1.
Go to Conguraon → Camera → Camera → IP Channel .
2.
Click More.
3.
Select Plug-and-Play.
4.
Oponal: Enable Auto Add Network Camera. The video recorder would automacally detect
and add the inacve network camera or third party ONVIF camera.
Figure 6-14 Auto Add Network Camera
Digital Video Recorder User Manual
51