HIKVISION DS-72xxHGHI-SH - 6. Setting up Network Access; IP Address Configuration; DHCP Enabled Network Setup

www.hikvision.com/en/us
Networking a DVR requires 3 steps:
1. Assign an IP address, Default Gateway, Subnet Mask, and a DNS server (NOTE:
DNS, not DDNS) to the DVR
2. Forward the appropriate ports on the router (Port Forwarding).
3. Register DDNS (DDNS registration is required only if the public IP address is Dynamic).
To assign an IP ADDRESS, go to “MENU”>”SYSTEM CONFIGURATION”>”NETWORK”
6. SETTING UP NETWORK ACCESS
NETWORK
Sub Menu
General
IP CONFIGURATION
Please note that the DVR’s default IP Address is 192.0.0.64
Enable
DHCP
With DHCP
enabled,
the router
will assign
an IP
address to
the DVR
Select
NIC
Type