Need help?Do you have a question about the HIKVISION DS-7316HQHI-SH and is the answer not in the manual?
General| Product color | Black |
|---|---|
| USB connectivity | Yes |
| Channels quantity | 16 channels |
| Total storage capacity | 12000 GB |
| Video compression formats | H.264 |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768, \\r 704 x 576, 704 x 480 |
| Display frame rate | 60 fps |
| Audio input | 4 |
| RS-485 ports | 1 |
| BNC input ports | 16 |
| USB 2.0 ports quantity | 3 |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Power requirements | 100-240 VAC, 47-63Hz |
| Power consumption (typical) | 55 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Dimensions (WxDxH) | 445 x 390 x 70 mm |
|---|
Describes the front panel layout and indicators for various DVR models.
Explains how to use the IR remote control and its buttons for DVR operation.
Details how to use a USB mouse for DVR navigation and control.
Explains the soft keyboard input methods used in the DVR interface.
Describes the rear panel connectors and their functions for different DVR models.
Provides procedures for safely starting, shutting down, and rebooting the DVR.
Guides users through initial DVR setup using the on-screen wizard.
Explains how to add and connect IP cameras to the DVR for live view and recording.
Introduces the live view function, showing real-time video from cameras.
Explains various operations and controls available in the live view interface.
Explains channel-zero encoding for reducing bandwidth in remote viewing.
Details how to customize live view settings like output interface and dwell time.
Guides on manually diagnosing video quality for analog channels.
Explains the process of logging out the current user session.
Details how to configure PTZ parameters for camera control.
Covers setting up camera presets, patrols, and patterns for automated movement.
Describes the PTZ control panel interface and its icons.
Details how to set video and audio encoding parameters for recording.
Explains how to set up recording schedules for cameras based on time and day.
Guides on setting up motion detection parameters and trigger actions.
Details how to configure recording triggered by alarm inputs.
Explains how to start and stop recording manually without a schedule.
Covers setting up special recording schedules for holidays.
Explains how to set up redundant recording for enhanced data safety.
Guides on grouping HDDs and assigning channels for recording.
Details methods to protect recorded files from being overwritten.
Provides methods for playing back recorded video files from the DVR.
Details additional playback functions and features.
Provides instructions for backing up recorded video files to external devices.
Covers managing connected backup devices like USB drives and writers.
Explains how to configure motion detection parameters and arming schedules.
Guides on configuring handling methods for external sensor alarms.
Details how to detect video loss and set alarm response actions.
Explains how to detect video tampering and set alarm responses.
Covers setting up continuous video quality diagnostics and linkage actions.
Details how to configure handling methods for various system exceptions.
Explains how to configure actions taken when an alarm or exception occurs.
Describes how to manually trigger or clear alarm outputs.
Guides on configuring basic network settings like IP address and working mode.
Covers advanced network configurations like PPPoE, DDNS, and ezviz cloud.
Details how to check real-time network traffic information.
Covers network detection functions like testing delay and exporting packets.
Provides steps for initializing newly installed HDDs before use.
Guides on adding and managing NAS or IP SAN disks as network HDDs.
Details how to configure and manage external eSATA devices for record or export.
Explains how to group HDDs for organized storage and recording.
Details how to allocate storage quotas for individual cameras.
Explains how to check the status of installed HDDs.
Guides on viewing HDD S.M.A.R.T. information for reliability monitoring.
Details how to detect bad sectors on the HDD to check its health.
Explains how to configure alarms for HDD errors like 'Uninitialized' or 'Abnormal'.
Guides on configuring On-Screen Display settings like date, time, and camera name.
Explains how to set up privacy mask zones to block specific areas from view.
Details how to adjust image parameters like brightness, contrast, and sharpness.
Guides on viewing system, camera, record, alarm, network, and HDD information.
Explains how to search and export system log files for analysis.
Guides on importing and exporting IP camera configuration data.
Details how to back up and restore DVR configuration files.
Provides instructions for upgrading the DVR firmware via local device or FTP.
Details how to restore the DVR to its factory default settings.
Guides on configuring the RS-232 serial port for parameter configuration or transparent channel.
Covers general settings like language, resolution, time zone, and mouse pointer speed.
Explains how to configure Daylight Saving Time settings.
Details additional settings like device name, CVBS brightness, and auto logout.
Guides on adding, deleting, and editing user accounts and permissions.
Provides procedures for logging out, shutting down, or rebooting the DVR.
Provides definitions for technical terms used in the manual.
Offers solutions for common issues and problems encountered with the DVR.
Lists compatible Hikvision IP camera models with their specifications.
To Next Page