DS-7600 Series NVR User’s Manual, 101316NA
10
• HDD property: redundancy, read-only, read/write (R/W)
• HDD quota management; different capacity can be assigned to different channel
• Supports S.M.A.R.T and bad sector detection
Recording, Capture, and Playback
• Holiday recording schedule configuration
• Continuous and event video encoding parameters
• 8 recording periods with separated recording types configurable
• Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule
• Searching record files and captured pictures by events (alarm input/motion detection/VCA)
• Customization tags, searching and playing back by tags
• Locking and unlocking record files
• Searching and playing back record files by channel number, recording type, start time, end time, etc.
• Zooming in when playing back
• Reverse playback for multi-channel
• Supports pause, speed up, speed down, skip forward, and skip backward when playback, locating by dragging the mouse
• Up to 16-ch synchronous playback at 4CIF real time
• Supports Smart Playback
Backup
• Export video data by USB
• Export video clips when playing back
• Management and maintenance of backup devices
Alarm and Exception
• Alarm for VCA, video loss, motion detection, tampering, HDD full, HDD error, network disconnected, IP conflicted, illegal login,
recording exception, etc.
• Alarm triggers full screen monitoring, audible warming, notifying surveillance center, sending e-mail and alarm output
• Automatic restore when system is abnormal
Other Local Functions
• Users can operate device by mouse and remote control
• Three-level user management; admin user can create many operating accounts and define their operating permissions, which
includes limiting access to any channel
• Operation, alarm exceptions, and information log recording and searching
• Import and export device configuration information.
Network
• 1 self-adaptive 10M/100M/1000M network interface and 4 or 8 independent PoE network interface are provided
• IPv6 is supported
• TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, UPnP, NFS, and iSCSI are supported
• TCP, UDP, and RTP for unicast
• Auto/manual port mapping and automatically discovered by UPnPTM
• Remote Web browser access by HTTPS ensures high security
To Next Page
Loading...
