HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
102
Figure 133, FTP Upgrade Menu
3. Enter the FTP Server Address.
4. Click the Upgrade button to upgrade the NVR. The NVR will automatically reboot after the upgrade is completed.
Restoring Default Settings
To restore factory default settings to your NVR:
1. Enter the Factory Default menu, shown in Figure 134 by going to Menu > Maintenance > Factory Default.
Figure 134, Factory Default Menu
2. Select the OK button to restore factory defaults or select to return to the previous menu.
NOTE: Network information such as IP address, subnet mask, and gateway will not be restored.