HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
103
Exporting and Importing Configuration
Configuration information from your NVR can be exported to a USB storage device and imported into another NVR. This will allow you to
efficiently setup the same configuration on numerous NVRs.
To export NVR configuration:
Figure 135, Import/Export Menu
1. Enter the Import/Export menu, shown in Figure 135 by going to Menu > Maintenance > Import/Export.
2. Connect the USB storage device to a USB port on the NVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Click the New Folder button to create a new folder.
5. Select the location where you would like the configuration to be stored on the USB storage device.
6. Click Export to export a configuration file to USB storage device. The configuration file will be named devCfg.bin.
7. Click to exit the Import/Export menu.
To import NVR configuration:
1. Enter the Import/Export menu, shown in Figure 135 by going to Menu > Maintenance > Import/Export.
2. Connect the USB storage device to a USB port on the NVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the configuration file. The configuration file is named devCfg.bin.
5. Click the Import button.
6. In the pop-up window, click Yes to confirm the import and the system will automatically reboot to make it effective.